V line Metal Reaktörler
VARİOSO YÜKSEK BASINÇ REAKTÖRLERİ
Profit further from the technical "features", such as:
- 1 Sitec 3-Way valve in Mat. No. 1.4571 with metering shaft
- 1 Manometer 0-400 bar or 800 bar in Mat. No. 1.4571
- 1 Bursting disc retainer with bursting disc 300 bar or 700 bar
- 1 Immersion pipe for temperature sensor, Dia. 3 mm (no temperature sensor)
Very intelligent! Very coveted! The contents include:
- Heidolph heating disc with magnetic stirrer, diameter 145 mm
- Insulation jacket and cooling water connection in the dimensions adapted to the heating disc
- The cooling spiral for water cooling is installed on the copper sleeve in the insulation jacket
- Supply and return have a M16 x 1 mm connection
- Additional bore for installation of a temperature sensor, if control is to be via the jacket temperatur
The magnetic stirrer heating disc for greatest demands
- Housing sealed all round against corrosive gases and liquids
- Protection of the plugs on the rear of the device
- Stronger stirrer magnet for the reliable pick-up of the stirring bar
- Optimum safety through overheating protection
The magnetic stirrer heating disc for greatest safety
- Exclusive magnetic stirrer with 4 safety circuits
- Inadvertent adjustment of the set temperature is excluded
- Safety shutdown via a second independent Pt 100 in the heating disc
- Adjustable safety temperature, at which the device will switch off
- Digital display for set and actual temperature, safety-T, speed
- Ensures no exceeding of the selected set temperature (protection of thermolabile substances)
- Electronically controlled speed, control accuracy ±1%
- Temperature control via a microprocessor (Fuzzy-Logic)
- Residual heat display of the heating disc when the device is switched off
- Medium, temperature sensor connection (accessories, please order separately)
- Interface RS 232 and analog output Series MR 3004 safety
We do not only focus on the correct contents in a secure frame. We also offer many notable beneficial detailed solutions. Thus, we developed the compact small autoclave system varioso for you. It meets at a symbiosis between reactor vivor, a magnetic heating and stirring disc and a completely balanced cooling system. You utilize the stirrer yourself according to your requirements, for example, a magnetic stirring bar.
You can expect something!
The autoclave "vivor" constitutes the core, with its compact 60 ml, an operating temperature of 200°C and material, such as Mat. No. 1.4980 (AISI 660) at 700 bar or Mat. No. 1.4435 (AISI 316L) and HC22 at 300 bar. Regarding safety, we rely on a locknut, conical ring seal and additional O-Ring in Kalrez.